Is an Asphalt Driveway Cheaper Than Concrete in Michigan?

Short answer: yes, usually by a fair amount.
We get this question at kitchen tables, on front porches, and once or twice while the homeowner’s dog supervised the entire estimate from the garage. It’s a good question. It just has two answers, because the price on install day and the price over twenty years are two different numbers.
Here’s the part that catches people off guard. The cheaper driveway on paper can turn into the expensive one. A thin base, poor drainage, or the wrong driveway material for how you actually use the space will eat up those savings fast. We’ve replaced more than a few “bargain” driveways that weren’t even ten years old, and every one of those homeowners thought they’d gotten a deal.
So, is an asphalt driveway cheaper than concrete? Below you’ll find real numbers per square foot, what each one costs to own over its lifespan, how a Michigan winter treats them differently, and the questions worth asking before you sign a quote. Grab a coffee. Your driveway isn’t going anywhere.
Start With the Number on the Quote
National cost guides put asphalt driveways in a typical range of about $4 to $15 per square foot installed. A concrete driveway usually runs $8 to $20 per square foot. Plain asphalt on a simple layout sits toward the low end, while stamped concrete with color or a decorative border lands at the top of that range or past it.
On a two-car driveway of around 600 square feet, the difference in total project cost can easily reach several thousand dollars. Larger driveways widen the gap, since every extra square foot carries it along.
Treat those figures as a ballpark. A national average has never actually seen your driveway. What really moves the asphalt driveway cost or concrete driveway cost:
- Driveway size and shape
- Tearing out and hauling away an old asphalt driveway or cracked concrete slabs
- Proper excavation and how much base material the soil needs
- Slope, access, and room for equipment
- Thickness, which matters more than most people expect
- Labor costs and material prices during the season you pave
Why Asphalt Comes In Lower
Mostly, it’s time. The asphalt installation process moves quickly. A crew can usually remove the old surface, grade, pave, and roll a new driveway in a day or two if the weather cooperates. Concrete needs forms, reinforcement, finishing, control joints, and expansion joints where the slab meets the garage or sidewalk. Then you wait about a week before parking on it. More hours and more specialized tools on site mean more labor on the invoice.
Asphalt also arrives from the plant hot and ready to place. Once it’s spread and compacted, the job is essentially done. Concrete has more steps between the truck and the finished surface, and every one of them takes skilled hands.
There’s a recycling angle too. Old asphalt can be ground up and worked back into new mix, which helps keep material prices in check. Cement manufacturing, on the other hand, uses a lot of energy and releases a significant amount of CO2, which shows up in both the environmental footprint and the concrete cost.
What It Costs to Own One
This is where the honest answer gets more interesting.
A typical asphalt driveway lifespan in Southeast Michigan is 15 to 20 years. With proper maintenance and a solid base, some go a good deal longer. The concrete driveway lifespan usually runs 30 to 40 years with good care. On paper, that closes part of the gap.
Asphalt asks for more frequent maintenance. Sealcoating every two to five years, depending on sun and traffic, keeps water out and stops the surface from drying out and turning gray. Add some crack repair as small cracks appear. None of it is expensive, but it belongs in your budget.
Concrete’s maintenance requirements are lighter. Resealing every five to ten years and keeping the joints in good shape covers most of it, and that minimal maintenance is one of the real concrete driveway pros. When concrete does have a problem, though, it tends to come in slab-sized pieces. Concrete repairs can run anywhere from $3 to $25 per square foot depending on the damage, and the new section rarely matches the old.
Unlike concrete, asphalt patches blend in after a season or two, and filling small cracks is a job plenty of handy homeowners take on themselves.
Oil stains are another everyday quirk. They stand out on light-colored concrete, while plain asphalt hides them well. A steady drip will soften asphalt over time, though, so a leaky car is worth fixing either way.
So, is asphalt cheaper than concrete over the full life of a driveway? For most of the homeowners we work with, yes. The lower upfront costs plus ongoing maintenance still usually come in under concrete’s initial cost, even with concrete’s fewer repairs. The margin is just smaller than the first quote makes it look.
Asphalt vs. Concrete in January
Asphalt is flexible. When frost pushes the ground up in the dead of winter and it settles back down in spring, asphalt moves with it. Concrete is rigid, so it handles that movement the only way it can: by cracking. That’s exactly why concrete gets control joints. They tell the cracks where to go.
Then there’s salt. Road salt tracked in on your tires, plus whatever you spread yourself, can cause concrete to flake and pit over time. The industry calls it scaling, and newer slabs are especially vulnerable. Asphalt takes salt in stride, which is a big reason it’s so common in cold climates.
One small perk: asphalt’s dark surface soaks up sunlight, so snow and ice tend to clear a bit faster on bright days below freezing temperatures. You won’t think about it in July. You’ll appreciate it in February.
To be fair to concrete, summer is its season. Asphalt softens in extreme heat, and a motorcycle kickstand or trailer jack can leave a dimple. Our summers are mild enough that it’s rarely a big deal, but it’s worth knowing.
When We’d Point You Toward Concrete
Cheaper isn’t automatically better for every house, and we’d rather tell you that now than have you wishing you’d picked differently in ten years. You may want to choose concrete when:
- You plan to stay for decades and want as little upkeep as possible
- Your sidewalks, porch, or garage apron are already concrete and you want everything to match
- You want a decorative concrete finish. Stamped concrete can mimic stone or brick, and concrete can also be stained or engraved, while asphalt has limited aesthetic options
- An RV, boat trailer, or other heavy loads will sit parked in the same spot for long stretches
- Your HOA requires it
Curb appeal plays a part here too. A decorative driveway makes a strong first impression, and plenty of real estate professionals will tell you curb appeal and property value tend to travel together. A fresh, clean asphalt driveway does a lot for curb appeal as well, just at a lower cost.
If you want the custom look without pouring a slab, brick pavers offer the most color and pattern choices, though they come with the highest price tag of the three. And on rural properties with long runs, a gravel driveway is sometimes the most affordable option of all, as long as you don’t mind regrading and topping it off now and then.
The Part Nobody Writes on the Quote
Whatever goes on top is only as good as what’s underneath it.
A thin layer of asphalt over poorly compacted soil will fail early, and suddenly the cheaper option isn’t. Concrete poured over soft clay has the same problem, just with heavier pieces. A lot of Southeast Michigan sits on clay that holds water like a sponge, so base preparation and proper drainage carry real weight here. Asphalt and concrete both perform well when they’re installed correctly. Installation quality decides most of what happens in year eight.
When comparing asphalt and concrete quotes, ask each contractor three things:
- How deep will the gravel base be?
- How will it be compacted?
- Where does the water go when it rains?
Two quotes that are a thousand dollars apart are often separated by a few inches of stone you’ll never see but will definitely feel later. Sometimes the higher number simply means more asphalt, a thicker mat that holds up better under daily traffic.
So Which One Should You Pick?
Homeowners seeking a solid, good-looking new driveway at the lowest reasonable cost usually choose asphalt, and in Michigan it’s hard to argue with. If low maintenance matters most, you plan to stay a long time, and the budget has some room, concrete earns its higher upfront price.
Think of it as a driveway investment either way. The best choice is the one that fits how long you’ll live there, how you use the space, and how much upkeep you’re happy to handle.
The quickest way to know for sure is to have someone walk the property with you. We’ll measure, check the drainage, ask how you actually use the driveway, and give you a straight recommendation on an asphalt or concrete driveway. The same person who writes your estimate stays your contact until the last truck pulls away, so you’re never left wondering who to call.
Let’s Walk Your Driveway Together
Sommerset Paving is a family-owned paving contractor serving homeowners throughout Southeast Michigan. If you’re weighing asphalt or concrete, we’re happy to come out, take a look, and give you an honest answer, even if it’s not the one with the bigger invoice.
Driveway Cost FAQs
Is an asphalt driveway cheaper than concrete in Michigan?
In most cases, yes. Asphalt usually costs noticeably less per square foot to install, and the job often wraps up in a day or two. Concrete’s longer lifespan narrows the gap over time, but most Southeast Michigan homeowners still come out ahead with asphalt once installation and maintenance costs are added together.
Is a concrete or asphalt driveway better for Michigan winters?
Asphalt generally handles winter better. It flexes as the ground freezes and thaws, and road salt doesn’t damage it the way it can damage concrete surfaces. Concrete can perform well here too, but it needs good joints, a solid base, and periodic sealing to resist salt.
How long does an asphalt driveway last in Michigan?
A well-built asphalt driveway typically lasts 15 to 20 years here, and longer with good care. The biggest factors are base preparation, drainage, and keeping up with sealcoating and crack repair so water never gets a chance to work its way underneath.
How often should I sealcoat an asphalt driveway?
Every two to five years for most homes, depending on sun exposure and traffic. Give a brand-new driveway six months to a year to cure before the first coat. Sealing too often can build up layers that crack and peel, so more isn’t always better.
Can I resurface my existing asphalt instead of replacing it?
Sometimes. If the base is still solid and the damage is mostly surface cracks or fading, an overlay on your existing asphalt can save real money. If the driveway has sunk, heaved, or crumbled in spots, the trouble is below the surface and full replacement is usually the smarter spend.
How soon can I drive on a new driveway?
New asphalt can usually handle regular cars after a day or so, though it’s wise to avoid sharp turns and heavy trucks for the first few weeks. Concrete generally needs about a week before you park on it and close to a month to reach full strength.
When is the best time for driveway installation in Michigan?
Late spring through early fall. Asphalt needs warm air and ground temperatures to compact properly, so most residential paving wraps up by mid to late fall. Getting on the schedule early in the year gives you the best shot at the dates you want.